REFASTENING A LOOSE ROLLER PULLEY

Always disconnect power when working on a treadmill and remove the drive roller from the treadmill before performing this repair.

 

You can fix a slipping pulley on a roller rather than having to buy a new one. First make sure the pulleys on the front roller and the motor are properly lined up. Repair the original one by drilling two small pilot holes through the plastic and into the metal roller tube on opposite sides of the pulley. Insert two short, self-tapping sheet metal screws through the pulley to secure it to the roller and that will solve the problem. Make sure not to drill into the bearing on the end of the roller tube. The screws must be short because the shaft of the roller is stationary while the rest of the roller spins and if the screws are too long and hit the shaft, you will get a horrible screeching sound. We've been using this fix for nearly 10 years and you don't have a recurring problem with this fix.

If you have any other questions, or if you feel that you have a problem not listed here, please contact us via e-mail at doc@treadmilldoctor.com.